The Challenge

Facilities leaders are accountable for keeping the building safe and operational — on tight budgets and with no tolerance for disruption to the people and operations it serves. From a leaking roof to a failing pump, water ingress, worn floors, corroded plant, and failing services all demand fast, durable repairs that can be made in place, out of hours if needed.

Roofs, gutters, walls, floors, mechanical plant, pumps, and pipework across commercial, institutional, and light-industrial facilities all wear, corrode, and leak over time. The right cold-applied repair keeps the building envelope watertight and the services running without major capital works.

Belzona provides liquid roof and wall waterproofing, floor repair systems, and equipment repair composites — all applied cold and in situ. Rumford Industrial Group supports facilities teams across five states with products and hands-on technical help for the whole building and its plant.

Belzona Solutions for Facilities Maintenance
Roofing & Waterproofing
Cold-applied liquid roof membranes repair and protect joints, seams, flashings, and gutters, offering long-term waterproofing (proven 25+ years) with low-odor application suitable for occupied buildings, plus an emergency repair option that can be applied even in adverse weather.
Concrete & Structural Repair
Epoxy composites and coatings resurface and rebuild damaged floors, walls, balconies, and overhead surfaces, protecting against chemical, moisture, and environmental attack while avoiding costly structural rebuilds.
Equipment Repair & Protection
Repair and protective coatings for pipes, heat exchangers, pumps, shafts, and HVAC systems address leaks, erosion, and corrosion while improving equipment efficiency and extending service life.
Safety Enhancement
Slip-resistant coatings and high-visibility color options improve safety on walkways, stairs, loading bays, and fire escapes throughout a facility.
Common Asset Areas
+
Roofs
Roof membranes, flashings, gutters, and skylights are prone to leaks and weather damage, requiring long-term waterproof coatings and emergency repair solutions suitable for occupied buildings. Learn More →
+
Floors
Concrete and stone floors face wear, chemical exposure, and safety concerns, requiring resurfacing, chemical-resistant coatings, and slip-reduction systems in high-traffic areas. Learn More →
+
Walls
Interior and exterior concrete or masonry walls suffer from moisture ingress, chemical attack, and structural damage, requiring water-repellent coatings and lightweight repair materials for overhead and vertical surfaces. Learn More →
+
Valves, Pipes & Fittings
Leaking pipes throughout a facility can be sealed in place using pipe wrapping techniques, avoiding disruptive shutdowns or replacement. Learn More →
+
Heat Exchangers
HVAC and cooling equipment face erosion and corrosion damage, requiring protective coatings that also improve operational efficiency. Learn More →
+
Pumps
Facility pumps experience wear and efficiency loss over time, with protective coatings capable of improving efficiency by up to 20% on refurbished units. Learn More →
+
Mechanical Power Transmission
Shafts and drive components wear down from continuous operation, requiring in-situ repair to avoid costly replacement and downtime. Learn More →
+
Fans, Blowers & Compressors
HVAC systems and air conditioning ductwork require protection from wear and corrosion to maintain reliable air handling throughout a facility. Learn More →
+
HVAC & Cooling Systems
Rooftop units, chillers, cooling towers, air handlers, and ductwork face year-round moisture, condensation, and aging seals, and leaks and corrosion can be repaired in place with minimal downtime. Learn More →
Facilities Equipment We Repair & Protect
Specific assets we service across facilities and building maintenance.
Equipment We Service
  • Roof membranes
  • Joints
  • Seams
  • Upstands
  • Flashings
  • Gutters
  • Skylights
  • Concrete floors
  • Stone floors
  • Balconies
  • Railings
  • Channels
  • Gratings
  • Loading bays
  • Walkways
  • Decking
  • Fire escapes
  • Concrete walls
  • Chimneys
  • Overhead concrete surfaces
  • Expansion joints
  • Brick walls
  • Stone walls
  • Window sills
  • Lintels
  • Glazing bars
  • Pipes
  • Heat exchangers
  • HVAC equipment
  • Cooling equipment
  • Pumps
  • Shafts
  • HVAC systems
  • Air conditioning ductwork
Proven Track Record
Chiller Plant Heat Exchangers Before
The Problem

Heat exchangers serving two new campus chiller plants faced electrolytic corrosion and erosion from the day they went into service.

  • ProblemElectrolysis & Corrosion
  • ScopeSixteen 50" Exchangers
  • RiskPremature Failure
Hover for Belzona repair →
Coated & Protected After — Belzona
The Solution

Water boxes and tube sheets coated with Belzona before start-up — corrosion protection and smoother, more efficient surfaces from day one.

  • Belzona 1341Insulating Barrier
  • ElectrolysisEliminated
  • ServiceCoated Before Start-Up
Protected before two new campus chiller plants went into service.
Read the full case history →
Municipal Facility Floors Before
The Problem

A heavy truck garage floor was spalled and stained, with worn markings, trip hazards, and a surface that could not be cleaned properly.

  • ProblemFailed, Porous Coating
  • ScopeFour Fleet Shops
  • RiskSlips & Contamination
Hover for Belzona repair →
Seamless Anti-Slip Floor After — Belzona
The Solution

Resurfaced with a seamless, anti-slip Belzona floor system and re-striped for traffic and parking — durable and far easier to clean.

  • Belzona 4151 / 5231Primer & Wearing Coats
  • FinishAnti-Slip, Color Matched
  • DowntimeStaged Area by Area
Re-striped for traffic and parking, and far easier to clean.
Read the full case history →
Industry at a Glance
Whole
Envelope
0
Hot Work Needed
No
Tear-Off
Fast
Return
Key Belzona Products
1111 — Super Metal
A two-component paste-grade system for repairing and rebuilding machinery and equipment, for structural bonding, and creating irregular load-bearing shims with good electrical insulation properties.
1341 — Supermetalglide
A two-component fluid-grade system for protecting immersed surfaces suffering from erosion-corrosion at operating temperatures up to 140 °F (60 °C), for improving the efficiency of fluid handling equipment, for structural bonding, and for creating irregular load-bearing shims with good electrical insulation properties.
2211 — MP Hi-Build Elastomer
A two-component, high-build elastomeric system designed to form a tough but flexible multi-purpose repair compound.
3111 — Flexible Membrane
A single-component emulsion for roof waterproofing and tank base sealing.
3121 — MR7
A two-component emergency repair and waterproofing system for protecting roofs and structures from atmospheric conditions.
4111 — Magma-Quartz
A magma-consistency repair/rebuilding system using a two-component epoxy resin and selected quartz particles for repairing and resurfacing concrete and stonework subjected to mechanical and chemical damage, and for grouting and structural bonding.
4141 — Magma-Build
An aggregate-filled, non-porous, and lightweight epoxy material for rebuilding overhead/vertical concrete and stonework.
4154 — Bulkfill Resin
A two-component epoxy resin designed to use with aggregates for repairing large volumes of concrete and stonework subjected to mechanical and chemical damage.
4411 — Granogrip
A three-component (base [1], solidifier [2], aluminum oxide aggregate [3]) and chemical-resistant epoxy system for creating non-slip surfaces on steel, concrete, quarry tiles, and stonework among others.
5122 — Clear Cladding
A treatment for porous surfaces which forms a clear and water-repellent barrier.
View Our Product Catalog
Get Expert Help

Rumford Industrial Group provides free technical consultation and on-site support across Southwest Ohio, Michigan, Indiana, Kentucky, and Southern Illinois.